|Minimum Order Quantity||1 Unit|
|Usage/Application||Pallet Strapping /Heavy Box Strapping|
|Strap Thickness (mm)||1.5 mm|
|Strap Width (mm)||25 mm|
|Dimension||280 x 160 x 180 mm|
|Maximum Tighten Power||3000N|
This tool is a friction weld type sealer. Over lapped thermoplastic band is sealed by heat that is produced by friction movement. So called
“Friction weld “.Compressed air pushes down the piston of air cylinder. The piston and upper portion of the vib rator are connected with pivot pin. The vibrator press together over lapped portion of the straps. Middle portion of vibrator has an oval hole. Oval hole is engaged with eccentric shaft of the pneumatic motor. Pneumatic motor rotates very high speed (10.000rpm). This makes vibrator to move like the swing of the pendulum in
high speed.Lower strap is fixed by triangle shaped tooth of the bottom die.Upper strap is vibrating drastically by triangle shaped tooth of the vibrator.Thus the over lapping strap portion is melted at the interface region.
|Suitable Strap Width||19 mm|
|Strap Sealer||3/4 Inch|
We offer PP Strapping Tools, which are designed to offer high performance in long production runs. These are based on reliable technology and are tested on various performance related parameters to check their compliance with international quality standards. L-bar sealers cut the shrink film around the product in one pass and then seal it using electrical impulse instead of heat.